Vango Airspeed Replacement Tube - 655 x 10cm

Product Information

In the unlikely event that you may need to replace your AirBeam® tube, simply remove the old tube from the beam sleeve and replace with the new tube. Once the beam sleeve is zipped and secured, replace into the tent sleeve and inflate. The AirSpeed tubes are quick and easy to change, so that you can carry on with your camping holiday as soon as possible!

Fits following Vango products

• Amalfi 500 (Main Beam)
• Amalfi 600 (Main Beam)
• Capri 500 XL (Main Beam)
• Capri 600 XL (Main Beam)
• Edoras 500XL (Main Beam)

Replacing Airbeam Instructions

• Fully deflate the AirBeam® tube to be replaced.
• Unzip the outer sleeve of the AirBeam® on the inside of the flysheet.
• Remove the AirBeam® from the internal zipped sleeve.
• Cut the cable tie that holds the zips together (these stop accidental opening).
• Remove the inner tube from its protective outer.
• Place the new inner tube inside the protective outer, aligning the valve with the opening in the protective and outer taking care not to catch the inner tube in the zip (connect the zips with the cable tie provided, so that they cannot be accidentally opened when the AirBeam® is inflated).
• Re-inflate the AirBeam® to the correct PSI.
• Re-insert the AirBeam® into the zipped sleeve on the tent flysheet.